Product specification
|
Taper shank subland drill for drilling clearence holes, 90°, HSS, DIN 8375, 22,5x13 mm, M12-90°
|
| Ø D | 22,5 mm |
| L | 253 mm |
| l | 155 mm |
| Weight | 0,56 kg |
| Helix Angle | λ = 25°÷30° |
| Point angle | ε = 118°/90° |
| Material | HSS - high-speed steel |
Usage
Subland drills with four lands are recommended for drilling of clearing holes and simultaneously countersinking in parts made of unalloyed or alloyed steel, cast steel up to 800 N/mm2, grey-, malleable- or nodular cast iron, Al-alloys etc. It is necessary to choose the lower cuttting conditions for drilling than the guidelines for usual drilling declare. |
| Manufacturing Mode | F - milled |
Surface Treatment
black oxide coated or steam tempered |
| Grinding Mode | N - conical lip relief |
| Ø d | 13,0 mm |
| l1 | 27 mm |
| Screw | M12 |
| MORSE | 2 |
| Note | PROFI tools |
Attachment:
|
