Product specification
|
Taper shank subland drill for drilling clearence holes, 90°, HSS, DIN 8375, 9,5x5,3 mm, M5-90°
|
| Ø D | 9,5 mm |
| L | 162 mm |
| l | 81 mm |
| Weight | 0,077 kg |
| Helix Angle | λ = 25°÷30° |
| Point angle | ε = 118°/90° |
| Material | HSS - high-speed steel |
| Manufacturing Mode | V - ground from solid |
Usage
Subland drills with four lands are recommended for drilling of clearing holes and simultaneously countersinking in parts made of unalloyed or alloyed steel, cast steel up to 800 N/mm2, grey-, malleable- or nodular cast iron, Al-alloys etc. It is necessary to choose the lower cuttting conditions for drilling than the guidelines for usual drilling declare. |
| Surface Treatment | without treatment |
| Grinding Mode | N - conical lip relief |
| Ø d | 5,3 mm |
| l1 | 13 mm |
| Screw | M5 |
| MORSE | 1 |
| Note | PROFI tools |
Attachment:
|
