| Z | 6 |
| l1 | 57 mm |
| l2 | 6 mm |
| l3 | 10 mm |
| d1 | 4 mm |
| d2 | 6 mm |
| d3 | 3,9 mm |
| R | 0,2 mm |
Note
Range of application:
High performance carbide end mill especially suitable for machining hardened and high tensile steels.
The high level of stiff ness enables good feed rates and long service lives, whilst the spiral angle creates a very good surface quality on the work piece.
The cutter is used for circumferential
milling (fi nishing).
For shallow depths, a face cut is also possible, in which case the feed rate should be reduced by 50%. |
Attachment:
6647 - katalog
Links:
|
